Saeco Modular Coffee Instruction And Maintenance Manual

Also see for Modular Coffee: Instruction and maintenance manual

Contents

EnglishLANGUAGE- If the "nation key" foresees the use of more than onelanguage on display, by using from the "LANGUAGE"menu, access can be gained to their selection.- If the "nation key" foresees a single language, by pressingno other selection is accessed.CUPWARMER- By confirming "ON", the cup heating plate is switched on atthe same time as the machine.- By confirming "OFF", the cup heating plate a ways remainsswitched off.GRINDER SETTING- For each of the dispensing instances offered by themachine if is possible to modify the quantity of groundcoffee utilized for dispensing, programmed duringinstallation phase.- By confirming "LOW" or "HIGH", this dose is respectivelyreduced by 1 gram or increased by about 1 gram. Byconfirming "STANDARD", the dose utilized for dispensingremains that programmed by the Maintenance Technician.TEMPERATUREFor each of the coffee dispensing instances offered by themachines it is possible to modify the temperature of the waterused for dispensing, programmed during the installationphase.- Confirming "LOW" or "MINIMUM" reduce the temperatureby 2 or 4° C respectively.- By confirming "HIGH" or "MAXIMUM", the temperature isincreased by 2 or 4° C respectively.- By confirming "STANDARD" the temperature remains thatprogrammed by the Maintenance Technician.N.B.: The "FIRST COFFEE" temperature is utilized for thefirst dispensing at machine switching on.PREINFUSIONIt is a function that allows a brief pause during the firstdispensing phase. This can improve the quality of the coffeethat during the pause has the time to "infuse" with the first partof the water received.- By confirming "SHORT" or "LONG", two kinds of "pre-infusion" can be obtained.- By confirming "OFF", no pre-infusion is taking place.HOT WATER PROGRAMM.By way of this function it is possible to enable theprogramming of the quantity of hot water for dispensing.- By confirming "ON", if is possible to program key , asalready described (see "6.1 1 Programming of dispensingkeys").- By selecting "OFF", key will not accept programmingof the dose which will have to be managed manually.During the dispensing of the various drinks, the machineadds a certain quantity of hot wafer, according to theprogramming carried out by the Technician.- By confirming "ON", the current mixing takes pace Byconfirming "OFF", NO hot water is added with the dis-pensing.N.B.: When the function is de-activated, the valuesprogrammed by the Technician will remain unchanged sothat they can be utilized again at function re-activation.15the outlining of functionscontinues on following pageHOT WATER MIXING