7 2Resetting the SG888ZB Gatewaywithout Internet ConnectionTo reset the SG888ZB Gateway to factory defaults without aninternet connection:1 Press and hold the multi button on top of the SG888ZB Gateway2 When the LED flashes red, release the multi button After approximately10 seconds, the LED ring turns solid red indicating the default values areloaded All the devices connected to the gatewaywill be deleted from the network and must be re-installedas previously describedWithout an internet connection, the SG888ZB Gateway will remain solid redResetting the AC10RF Coordinatorwithout Internet Connection1 Press and hold the pairing button on the AC10RF Coordinator for 10 seconds2 The LED light on the AC10 Coordinator will turn amber, indicating the system is resetting3 When the system is reset, the LED light will turn red once again, indicating the system isready All the devices connected to the gateway will be deleted from the network and mustbe re-installed as previously describedResetting Factory DefaultsSection 7
