7 4Resetting the AKL01/04/06PRF Zone Pumpor AKL08RF Zone Valve Wiring Centerwithout Internet Connection1 Press and hold the Pair button for about 20seconds until the G1/G2 lights start flashingAfter releasing the button, the network status light begins flashing2 To complete the reset, cycle the power to the Wiring Center off for 10 secondsTo reset the AKL Wiring Centers, locatethe Pair button on the top of the cabinetnear the cover screw on the right side.with Internet ConnectionTo reset the AKL Wiring Centers, delete them from the SALUS Smart Home mobile application as follows:The AKL Wiring Center WILL NOT OPERATE correctly until the power is cycled off and on.7 Once the AKL Wiring Center is removed, be sure to cycle off the power for more than 10 secondsto fully reset the unit1 Select the menu from theupper right of the home screen2 Choose “Equipment” 3 Then choose, “All equipment”4 Choose the appropriateWiring Center from the list5 Scroll to the bottom ofthe screen6 Select “Remove Wiring Center”Resetting Factory DefaultsSection 7
