7 5Resetting the AX10RF Receiverwithout Internet Connection1 Using a small stiff wire, press and hold the rightreset button until the red auto/manual backlightLED flashes2 Using the same probe, press and hold the left reset button until the red auto/manual backlightLED and the green on/off backlight LED flash alternately3 To complete the reset, cycle the power to the AX10RF Receiver off for 10 secondsThe AX10RF Receiver has 2 reset buttons on thebottom surface of the unit cover. The right buttonis for the receiver and the left is for the system.with Internet ConnectionTo reset the AX10RF Receiver, delete the icon from the SALUS Smart Home mobile application in thesame way as the Wiring Centers:7 Once the AKL Wiring Center is removed, be sure to cycle off the power for more than 10 secondsto fully reset the unit1 Select the menu from theupper right of the home screen2 Choose “Equipment” 3 Then choose, “All equipment”4 Choose the appropriateWiring Center from the list5 Scroll to the bottom ofthe screen6 Select “Remove Wiring Center”Resetting Factory DefaultsSection 7
