Salus HTRP-RF(50) Full User Manual

497. Installation in OFFLINE MODE without SALUS SmartHome application7.1 General informationsIn OFFLINE mode (without application), you can use the UGE600 Universal Gateway or CO10RF coordinator to configure the system. Please notethat you cannot use both devices at the same time. Before installing the system you have to decide:- to create a network using the UGE600 Universal Gateway (you can connect it to the Internet in the future)- to create a network using the CO10RF coordinator (you can’t connect it to the Internet)REMEMBER! The UGE600 Universal Gateway and CO10RF coordinator are two different devices.Each device creates and operates it’s own network.Universal Gateway - - CO10RF CoordinatorPlease note! If your system has been installed in the OFFLINE mode using the UGE600 Universal Gateway and then connected to the Internet,all devices should be found in the SALUS Smart Home application (using „Scan for equipment” button). All devices found in the application don’tneed to be reconfigured, because all settings are automatically copied from the gateway.Please note! If your system was created using the CO10RF coordinator and you would like to control the devices via the Internet, then alldevices should be reinstalled using the UGE600 Universal Gateway.CO10RF CoordinatorYou can use standard ZigBee network coordinator to install and use yourdevices.NOTE: CO10RF Coordinator is included in the set with the KL08RFControl Box.Universal Gateway isNOT CONNECTED TO THE INTERNETYou can use your devices locally without the Smart Home App. Gatewayworks in this mode as standard ZigBee coordinator.KL08RF - Wiring Centre for 8-zoneunderfloor heating (UFH).+ extension KL04RFTRV(Thermostatic Radiator Valve)- with wireless communication.RX10RFreceiver