Samson 3271 Mounting And Operating Instructions

Also see for 3251: Mounting and operating instructions Mounting and operating instructions Mounting and operating instructions Mounting and operating instructions Mounting and operating instructions

Samson 3271 Mounting And Operating Instructions Manual pdf 7 page image

EB 8052 EN 1-3Safety instructions and measuresResponsibilities of the operatorThe operator is responsible for proper operation and compliance with the safety regulations.Operators are obliged to provide these mounting and operating instructions as well as thereferenced documents to the operating personnel and to instruct them in proper operation.Furthermore, the operator must ensure that operating personnel or third persons are not ex-posed to any danger.Responsibilities of operating personnelOperating personnel must read and understand these mounting and operating instructions aswell as the referenced documents and observe the specified hazard statements, warningsand caution notes. Furthermore, the operating personnel must be familiar with the applicablehealth, safety and accident prevention regulations and comply with them.Referenced standards and regulationsThe control valves comply with the requirements of the European Pressure Equipment Direc-tive 2014/68/EU. Valves with a CE marking have a declaration of conformity, which in-cludes information about the applied conformity assessment procedure. The 'Certificates' sec-tion contains this declaration of conformity.According to the ignition risk assessment performed in accordance with EN 13463-1:2009,section 5.2, the non-electrical control valves do not have their own potential ignition sourceeven in the rare incident of an operating fault. As a result, they do not fall within the scope ofDirective 2014/34/EU.Î For connection to the equipotential bonding system, observe the requirements specified insection 6.4 of EN 60079-14 (VDE 0165 Part 1).Referenced documentationThe following documents apply in addition to these mounting and operating instructions:− Mounting and operating instructions for the mounted actuator, e.g. u EB 8310-X forType 3271 or Type 3277 Pneumatic Actuator− Mounting and operating instructions for mounted valve accessories (positioner, solenoidvalve etc.)− u AB 0100 for tools, tightening torques and lubricant