Picture OptionsMENU → Picture → Picture OptionsUsing this function, you can configure additional picture settings to suit your preference." When connecting a PC, you can only make changes to Colour Tone.Picture OptionsColour Tone StandardDigital Clean View AutoMPEG Noise Filter AutoHDMI Black Level LowFilm Mode OffAnalogue Clean View OffLED Clear Motion Off● Colour Tone (Cool / Standard / Warm1 / Warm2)" Warm1 or Warm2 will be deactivated when the picture mode is Dynamic." Settings can be adjusted and stored for each external device connected to an input on the product.● Digital Clean View (Off / Low / Medium / High / Auto / Auto Visualisation): If the broadcast signal received by yourproduct is weak, you can activate the Digital Clean View feature to reduce any static and ghosting that may appearon the screen." When the signal is weak, try other options until the best picture is displayed.Auto Visualisation: When changing analogue channels, displays signal strength." This function is available for analogue channels only." When bar is green, you are receiving the best possible signal.● MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality.● HDMI Black Level (Low / Normal): Selects the black level on the screen to adjust the screen depth." Available only in HDMI mode (RGB signals).● Film Mode (Off / Auto1 / Auto2): Sets the product to automatically sense and process film signals from all sourcesand adjust the picture for optimum quality." Available in TV mode, HDMI (1080i)." If the screen does not seem natural, change its option to Off / Auto1 / Auto2 in Film Mode.● Analogue Clean View : Reduces noise in the form of a diagonal line that occurs due to interferences betweensignals." This function is available for analogue channels only.● LED Clear Motion: Removes drag from fast scenes with a lot of movement to provide a clear picture." The screen may become slightly darker when you play LED Clear Motion.English - 37Basic Features