Samsung 3 Series User Manual

Also see for 3 SERIES: User manual User manual User manual Quick setup guide User manual

Issues Solutions and ExplanationsAnynet+ (HDMI-CEC)Anynet+ does not work. Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+devices only.You can connect only one receiver (home theatre).Check if the Anynet+ device power cord is properly connected.Check the Anynet+ device’s Video/Audio/HDMI cable connections.Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.Check whether the product remote control is in product mode.Check whether the remote control is Anynet+ compatible.Anynet+ doesn’t work in certain situations. (Searching channels, operating Setup,etc.)If you have removed and then reconnected the HDMI cable, please make sure tosearch devices again or turn your product off and on again.I want to start Anynet+. Check if the Anynet+ device is properly connected to the product and check if theAnynet+ (HDMI-CEC) is set to On. (System → Anynet+ (HDMI-CEC))Open the Tools menu using your remote and then select Anynet+ (HDMI-CEC). Thenselect a menu you want.I want to exit Anynet+. Select View TV in the Anynet+ menu.Go to Source screen using your remote and select a non-Anynet+ device.The message Connecting toAnynet+ device ... appears onthe screen.You cannot use the remote control when you are configuring Anynet+ or switching toa view mode.Use the remote control after the product has completed Anynet+ configuration orhas finished switching to Anynet+.English - 76Other Information