English - 18If you want to reset this feature...1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ENTER button to select Plug & Play. For further details on setting upoptions, refer to the pages 16~17.➢ The Plug & Play feature is only available in the TV.Changing ChannelsUsing the Channel Buttons1 Press the CHW.LINKor CHW.LINK button to change channels.➢ When you press the CHW.LINKor CHW.LINK button, the TV changes channels insequence. You will see all the channels that the TV has memorized.(The TV must have memorized at least three channels). You will not seechannels that were either erased or not memorized. See pages 20-21 tomemorize channels.Using the Number Buttons1 Press the number buttons to go directly to a channel. For example, to selectchannel 27, press , then 7.The TV will change channels when you press the second number.➢ For quick channel change, press the number buttons, then press the ENTERbutton.Using the “-” ButtonThe “ ” button is used to select stations that broadcast a digital signal.1 For example, for Channel 7-1, press 7, then , then 1.➢ HD indicates the TV is receiving a Digital High Definition signal.SD indicates the TV is receiving a Standard Definition signal.➢ For quick channel change, press the number buttons, then press the ENTERbutton.Using the PRE-CH Button to select the Previous ChannelUse the number buttons to quickly tune to any channel.1 Press the PRE-CH button. The TV will switch to the last channel viewed.➢ To quickly switch between two channels that are far apart, tune to onechannel, then use the number button to select the second channel.Then use the PRE-CH button to quickly alternate between them.Plug & Play ►Language : English ►Time ►V-Chip ►Caption ►External Settings ►Entertainment : Off ►▼ MoreSetupT VMove ReturnEnterMenu language, Store Demo,Channels and Time will be set.iStartPlug & PlayReturnEnter
