English - To Select the SourceUse to select TV or other external input sources such as DVD players or Set-top/Cable boxes connected to the TV.Use to select the input source of your choice.1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Input, then press the ENTER button. Press the ENTER button to select Source List.Press the ▲ or ▼ button to select signal source, then press the ENTER button.➢ Available signal sources: TV, AV1, AV, S-Video, Component1,Component, PC, HDMI1, HDMI.➢ You can choose only those external devices that are connected to the TV.To Edit the Input Source NameYou can name the device connected to the input jacks to make your input source selection easier.1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Input, then press the ENTER button.Press the ▲ or ▼ button to select Edit Name, then press the ENTER button. Press the ▲ or ▼ button to select AV1, AV, S-Video, Component1,Component, PC, HDMI1 or HDMI input jack, then press the ENTER button. Press the ▲ or ▼ button to select VCR, DVD, Cable STB, Satellite STB, PVRSTB, AV Receiver, Game, Camcorder, PC, TV, IPTV, Blu-Ray, HD DVD orDigital Media Adapter input source, then press the ENTER button.Press the EXIT button to exit.When a PC with a resolution of 640 x 480@60Hz is connected to the HDMI IN 2port, you should set the HDMI2 mode to PC in the Edit Name menu.You can also press the SOURCE button on the remote control to view an externalsignal source.Source List : TV ►Edit Name ►InputT VEnterMove ReturnTVAV1 : - - - -AV2 : - - - -S-Video : - - - -Component1 : - - - -Component2 : - - - -PC : - - - -▼ MoreSource ListT VEnterMove ReturnSource List : TV ►Edit Name ►InputT VEnterMove ReturnAV1 : - - - -AV2 :S-Video :Component1 :Component2 :PC :HDMI1 :HDMI2 :Edit NameT V▼EnterMove Return- - - -VCRDVDCable STBSatellite STBPVR STBAV ReceiverGame
