English - 5Upgrading the SoftwareSamsung may offer upgrades for your TV’s firmware in the future. Please contact the Samsung call center at1-800-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will bepossible by connecting a USB drive to the USB port.1 Insert a USB drive containing the firmware upgrade into the USB Upgrade Porton the rear of the TV. Press the MENU button to display the menu.Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select SW Upgrade, then press the ENTER button.4 Press the ▲ or ▼ button to select USB, then press the ENTER button.The message Scanning for USB... It may take up to 0 seconds is displayed.5 If the firmware on the USB is properly recognized, the message Upgradeversion xxxx to version xxxx The system would be reset after upgrade. isdisplayed.Press the ◄ or ► button to select Yes, then press the ENTER button.The upgrade starts.Please be careful to not disconnect the power or remove the USB drive whileupgrades are being applied.The TV will shut off and turn on automatically after completing the firmwareupgrade.Please check the firmware version after the upgrades are complete.When software is upgraded, video and audio settings you have made will returnto their default (factory) settings. We recommend you write down your settingsso that you can easily reset them after the upgrade.TV Rear PanelUSB DriveSW UpgradeScanning for USB...It may take up to 30 secondsUSB ►SW UpgradeT VEnter Return▲ MoreEnergy Saving : Off ►SW Upgrade ►SetupT VEnterMove ReturnSW UpgradeUpgrade version XXXX to version XXXX? Thesystem would be reset after upgrade.Yes No($-) ).
