English - 1Storing Channels in Memory (Automatic Method)1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Auto Program, then press the ENTERbutton. Press the ▲ or ▼ button to select the antenna connection, then press theENTER button.➢ Air: Air antenna signal.Cable: Cable antenna signal.Auto: Air and Cable antenna signals.4 When selecting the Cable TV system:Press the ENTER button to start the auto program.Press the ▲ or ▼ to select the correct analog signal cable system source fromamong STD, HRC, and IRC, then press the ENTER button. If you have Digitalcable TV, select the cable system signal source for both Analog and Digital.➢ STD, HRC, and IRC identify various types of cable TV systems. Contactyour local cable company to identify the type of cable system that exists inyour particular area. At this point the signal source has been selected.5 The TV begins memorizing all available stations.➢ After all the available channels are stored, the TV starts to removescrambled channels (see page 38). The Auto program menu then reappears.➢ If you want to stop Auto Programming, press the ENTER button. The StopAuto Program? message will be displayed. Select Yes by pressing the ◄or ► button.Press the EXIT button to exit.Antenna : Air ►Auto Program ►Clear Scrambled Channel ►Channel List ►Name ►Fine Tune ►Signal Strength ►ChannelT VEnterMove ReturnAuto ProgramAuto Program in progress.DTV Air : 5 Air : 3DTV Cable : -- Cable : -- Air 6768 %StopEnter ReturnAuto ProgramT VSelect the antenna to execute the AutoProgram function.AirCableAutoStartStartEnterMove ReturnStartSelects a cable signal type for your location.Auto ProgramT VEnterMove ReturnAnalogDigitalStartSTDHRCIRCSTDHRCIRCAuto ProgramRemoving scrambled channel.DVD Cable 3-168%StopEnter Skip
