13English03 Basic Features✎ NOTEx When selecting the Cable TV system: STD, HRCand IRC identify various types of cable TV systems.Contact your local cable company to identify thetype of cable system that exists in your particulararea. At this point, the signal source has beenselected.x After all the available channels are stored, it startsto remove scrambled channels. The Auto Programmenu then reappears.¦ Editing ChannelsO MENUm → Channel → Channel List → ENTEREChannel Name Edit1. Select a channel and press the TOOLS button.2. Edit the channel name using the Channel Name Editmenu.■ Channel Name Edit (analog channels only): Assign yourown channel name.¦ Other FeaturesO MENUm → Channel → ENTEREClear Scrambled ChannelThis function is used to ilter out scrambled channels afterAuto Program is completed. This process may take up to20~30 minutes.How to Stop Searching Scrambled Channels1. Press the ENTERE button to select Stop.2. Press the ◄ button to select Yes.3. Press the ENTERE button.✎ This function is only available in Cable mode.Channel ListChannel List Option Menu(in Channel List)Set each channel using the Channel List menu options (Add/ Delete, Timer Viewing, Select All / Deselect All). Optionmenu items may differ depending on the channel status.1. Select a channel and press the TOOLS button.2. Select a function and change its settings.■ Add / Delete: Delete or add a channel to display thechannels you want.✎ NOTEx All deleted channels will be shown on theAll Channels menu.x A gray-colored channel indicates the channelhas been deleted.x The Add menu only appears for deletedchannels.x Delete a channel from the Added Channels orFavorite menu in the same manner.■ Timer Viewing: You can set a desired channel to bedisplayed automatically at the reserved time. Set thecurrent time irst to use this function.1. Press the ◄ / ► / ▲ / ▼ buttons to select thedesired channel in Channel List.2. Press the TOOLS button, then select TimerViewing.3. Scroll up or down to adjust the settings in the box,or use the numeric buttons on your remote to enterthe date and time.✎ If you selected Once, Every Week, orEveryday in Repeat, you can enter the dateyou want.4. Select OK, then press the ENTERE button whendone.