English - 102Setting the DLNA NetworkDLNA allows you to watch videos and pictures saved on your PC on your TV through a network connection in Wiselink Promode. This removes the need to copy them to a USB storage device and then connect the device to your TV. To use DLNA,the TV must be connected to the network and the DLNA application must be installed on your PC.Network Connections DiagramTV Rear Panel The Modem Port onthe WallModem CableExternal Modem(ADSL/VDSL/Cable TV)LAN Cable1PCLAN Cable21. Connect the [LAN] porton the rear panel of theTV to the external modemwith a LAN Cable.2. Connect the PC to whichthe “DLNA PC ShareManager” program will beinstalled and the externalmodem using a LANcable.. Connect the LAN port onthe wall and the externalmodem with a ModemCable.Connecting to the Network1. When connecting to the network is complete, set up the network on the TV (see page 121).A Wireless Internet connection does not support DLNA.The first 3 digits (subnet address) of the IP addresses of the TV and the PC must be the same (e.g. IP Address:123.456.789.XX )2. Run a “Network Test” to check the network settings (see page 122).➣➣WISELINK Pro-DLNA
