Samsung BN68-01691A-02 User Manual

Also see for LN46A850: Quick setup guide Specification sheet

Contents

English - 12Manual Setup1. Press the MENU button to display the menu.Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.2. Press the ▲ or ▼ button to select “Wireless Network Setup”, then press theENTER button.3. Press the ENTER button to select “Internet Protocol Setup”.4. Press the ▲ or ▼ button to select “Manual Setup”, then press the ENTERbutton.5. Press the ▲, ▼, ◄ or ► button to move to an item, and press the numericbutton to configure the selected item. Press the ENTER button.If you want to use a static IP address, refer to the user manual of yourwireless IP sharer.Select “Access Point Select” to check the network connectivity. (Refer topage 124)Press the EXIT button to exit.➣➣SetupNetwork selection : WirelessCable Network SetupWireless Network SetupV-ChipCaptionExternal SettingsEntertainment : OffEnergy Saving : OffPIPSoftware UpgradeWireless Network SetupInternet Protocol Setup : Auto SetupNetwork TestAccess Point Select : AP1IP Address : 0 0 0 0Subnet Mask : 0 0 0 0Gateway : 0 0 0 0DNS Server : 0 0 0 0EnterMove ReturnAuto SetupManual SetupWireless Network SetupInternet Protocol Setup : Manual SetupNetwork TestAccess Point Select : AP1IP Address : 0 0 0 0Subnet Mask : 0 0 0 0Gateway : 0 0 0 0DNS Server : 0 0 0 0Enter ReturnMove ~ NumberWireless Network SetupThe menu is activated only if the Samsung Infolink Wireless adapter is connected. (See page 120)Auto SetupIf you connect the LAN cable and it supports DHCP, the Internet Protocol (IP)Settings are automatically configured.The wireless IP sharer to be connected to this product must support DHCP.1. Press the MENU button to display the menu.Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.2. Press the ▲ or ▼ button to select “Wireless Network Setup”, then press theENTER button.3. Press the ENTER button to select “Internet Protocol Setup”.4. Press the ▲ or ▼ button to select “Auto Setup”, then press the ENTERbutton.The Internet Protocol is set automatically.Select “Access Point Select” to check the network connectivity.(Refer to page 124)Press the EXIT button to exit.➣➣➣➣➣SetupNetwork selection : WirelessCable Network SetupWireless Network SetupV-ChipCaptionExternal SettingsEntertainment : OffEnergy Saving : OffPIPSoftware UpgradeWireless Network SetupInternet Protocol Setup : Auto SetupNetwork TestAccess Point Select : AP1IP Address : 0 0 0 0Subnet Mask : 0 0 0 0Gateway : 0 0 0 0DNS Server : 0 0 0 0EnterMove ReturnAuto SetupManual Setup