English - 17Problem Possible SolutionScreen is black and power indicatorlight blinks steadily.On your computer check: Power, Signal Cable.The TV is using its power management system.Move the computer's mouse or press any key on the keyboard.Image is not stable and may appearto vibrate when you have a computerconnected to the PC input.If the setting is not correct, use your computer utility program to change thedisplay settings.Your TV supports multiscan display functions within the followingfrequency domain:Horizontal frequency (kHz) 30~60Vertical frequency (Hz) 60~75PC Maximum refresh rate (at 60 Hz) 1920 x 1080➣Image is not centered on the screen. Adjust the horizontal and vertical position.The screen position must be adjusted on the output source (i.e. STB) with adigital signal.The picture appears distorted in thecorner of the screen.If “Just Scan” is selected with some external devices, the picture may appeardistorted in the corner of the screen. This symptom is caused by the externaldevices, not TV.The ‘Resets all settings to the defaultvalues’ message appears.This appears when you press and hold the EXIT button for a while. The productsettings are reset to the factory defaults.You may see small particles if youlook closely at the edge of the bezelsurrounding the TV screen.This is part of the product’s design and is not a defect.This TFT LCD panel uses a panel consisting of sub pixels (6 220 800) which require sophisticated technology to produce.However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance ofthe product.
