Wireless network setup1812. Using a Network-Connected MachineDisconnect the network cable (standard or network). Your machine shouldthen start communicating wirelessly with the network. In case of Ad-hocmode, you can use a wireless LAN and wired LAN simultaneously.10 Insert the supplied software CD into your CD-ROM drive, and follow theinstructions in the window to set up the wireless network.18Turning the Wi-Fi network on/offIf your machine has a display, you can also turn on/off the Wi-Fi from themachine’s control panel using the Network menu.1 Check whether the network cable is connected to the machine. If not,connect the machine with a standard network cable.2 Start a web browser such as Internet Explorer, Safari, or Firefox and enteryour machine’s new IP address in the browser window.For example,3 Click Login on the upper right of the SyncThru™ Web Service website.4 If it’s your first time logging into SyncThru™ Web Service you need tolog-in as an administrator. Type in the below default ID and Password.We recommend you to change the default password for securityreasons.• ID: admin• Password: sec000005 When the SyncThru™ Web Service window opens, click NetworkSettings.6 Click Wireless > Custom.You can also turn the Wi-Fi network on/off.19Setting the Wi-Fi Direct for mobile printingWi-Fi Direct is an easy-to-setup peer-to-peer connection method between theWi-Fi Direct certified printer and a mobile device that provides a secureconnection and better throughput than ad hoc mode.With Wi-Fi Direct, you can connect your printer to a Wi-Fi Direct network whileconcurrently connecting to an access point, You can also use a wired networkand a Wi-Fi Direct network simultaneously so multiple users can access and printdocuments both from Wi-Fi Direct and from a wired network.
