Basic copying622. Menu Overview and Basic Setup1 CLX-330x Series/CLX-330xW Series: Make sure that the Scan to button’sLED is off.CLX-330xFN Series/CLX-330xFW Series: Select (copy) on the controlpanel.2 Select (Menu) > Copy Feature > Darkness on the control panel.3 Select the option you want and press OK.For example, the Light+5 being the lightest, and the Dark+5 being thedarkest.4 Press (Stop/Clear) to return to ready mode.DarknessThe Darkness menu lets you increase or decrease the difference between thebright and dark areas of an image.1 CLX-330x Series/CLX-330xW Series: Make sure that the Scan to button’sLED is off.CLX-330xFN Series/CLX-330xFW Series: Select (copy) on the controlpanel.2 Select (Menu) > Copy Feature > Darkness on the control panel.3 Select the option you want and press OK.4 Press (Stop/Clear) to return to ready mode.OriginalThe original setting is used to improve the copy quality by selecting thedocument for the current copy job.1 CLX-330x Series/CLX-330xW Series: Make sure that the Scan to button’sLED is off.CLX-330xFN Series/CLX-330xFW Series: Select (copy) on the controlpanel.2 Select (Menu) > Copy Feature > Original Type on the control panel.3 Select the option you want and press OK.• Text: Use for originals containing mostly text.• Text/Photo: Use for originals with mixed text and photographs.If texts in the printout is blurry, select Text to get the clear texts.• Photo: Use when the originals are photographs.• Magazine: Use when the originals are magazine.4 Press (Stop/Clear) to return to ready mode.
