Glossary319GlossaryBOOTPBootstrap Protocol. A network protocol used by a network client to obtain its IPaddress automatically. This is usually done in the bootstrap process ofcomputers or operating systems running on them. The BOOTP servers assignthe IP address from a pool of addresses to each client. BOOTP enables 'disklessworkstation' computers to obtain an IP address prior to loading any advancedoperating system.CCDCharge Coupled Device (CCD) is a hardware which enables the scan job. CCDLocking mechanism is also used to hold the CCD module to prevent any damagewhen you move the machine.CollationCollation is a process of printing a multiple-copy job in sets. When collation isselected, the device prints an entire set before printing additional copies.Control PanelA control panel is a flat, typically vertical, area where control or monitoringinstruments are displayed. They are typically found in front of the machine.CoverageIt is the printing term used for a toner usage measurement on printing. Forexample, 5% coverage means that an A4 sided paper has about 5% image or texton it. So, if the paper or original has complicated images or lots of text on it, thecoverage will be higher and at the same time, a toner usage will be as much asthe coverage.CSVComma Separated Values (CSV). A type of file format, CSV is used to exchangedata between disparate applications. The file format, as it is used in MicrosoftExcel, has become a de facto standard throughout the industry, even amongnon-Microsoft platforms.DADFA Duplex Automatic Document Feeder (DADF) is a scanning unit that willautomatically feed and turn over an original sheet of paper so that the machinecan scan on both sides of the paper.DefaultThe value or setting that is in effect when taking a printer out of its box state,reset, or initialized.
