Samsung CLX-6220 Series User Manual

Also see for CLX-6220 Series: User guide Quick install guide Troubleshooting

Contents

Administrator’s Guide (Windows only)_ 44. Read License Agreement, and select I accept the terms of theLicense Agreement. Then, click Next.5. Select Package Type window appears.Select Normal(setup.exe) or Self-Extraction Package.If you place the mouse cursor over the package type, you can see thedetailed information on the bottom right side of the window.6. Select Software and Utilities to Install window appears.Check the device drivers or application software you want to included inthe setup package and click Next.7. Select Printer connection window appears.Select the printer connection type and click Next.•If you selected Network Connection, Search Network Printerswindow appears, type in the IP address or host name in theinformation field than click Search. when you are finished, clickNext.•The discovered printer list will show network printers on the samesubnet. If you want to specify a network printer that is located oversubnet then specify IP address of network printer directly.If you can’t search network printers on the network then checkwhether your firewall setting is disabled. If it is enabled, disablefirewall temporarily and try searching again.8. Set Printer Drivers window appears. Click Next.If necessary, configure printer name, sharing, shared name and defaultprinter setting. If you changed settings then you should click Applybutton to apply changes then click Next.9. Summary window appears. Check the package information and clickNext to start creating the setup package.You can modify the package configuration by clicking the Back button.Check the Install the package as silent mode, if you want tomake the installation package as a silent installation package.Silent installation installs the driver automatically by the set optionwithout user intervention.10. When creating the setup package is finished, Packaging Completedwindow appears.Check Open package folder upon completion if you want the createdpackage to open automatically after it’s created.11. Click Finish.Creating a setup script fileYou can generate setup configuration script file based on the CD image. Itcan be used with Silent installation for distributing software to multiple clientcomputers. For example, you can upload a full CD setup files into a fileserver then distribute batch file or log-on script file that executes silentinstallation with this customized script file(ex: \\\CD\setup.exe/s /i”c:\temp\CONFIG.CI3).1. Make sure that the machine is connected to the network or USB andpowered on.2. Insert the supplied software CD into your CD-ROM drive.•The software CD should automatically run and an installation windowappears.•If the installation window does not appear, click Start and then Run.Type X:\Setup.exe, replacing “X” with the letter which representsyour CD-ROM drive. Click OK.•If you use Windows Vista, Windows 7 and Windows 2008 Server R2click Start > All programs > Accessories > Run.Type X:\Setup.exe replacing “X” with the letter which representsyour CD-ROM drive and click OK.•If the AutoPlay window appears in Windows Vista, click RunSetup.exe in Install or run program field, and click Continue in theUser Account Control windows.•If the AutoPlay window appears in Windows 7 and Windows 2008Server R2, click Run Setup.exe in Install or run program field, andclick Yes in the User Account Control windows.3. Select Administrator Installation > Create Customized Installer.If necessary, select a language from the drop-down list.4. Read License Agreement, and select I accept the terms of theLicense Agreement. Then, click Next.5. Select Package Type window appears.Select Generate a Setup script file.If you place the mouse cursor over the package type, you can see thedetailed information on the bottom right side of the window.6. Select Software and Utilities to Install window appears.Check the device drivers or application software you want to included inthe setup package and click Next.7. Select Printer connection window appears.Select the printer connection type and click Next.•If you selected Network Connection, Search Network Printerswindow appears, type in the IP address or host name in theinformation field than click Search. when you are finished, clickNext.•The discovered printer list will show network printers on the samesubnet. If you want to specify a network printer that is located oversubnet then specify IP address of network printer directly.•If you can’t search network printers on the network then checkwhether your firewall setting is disabled. If it is enabled, disablefirewall temporarily and try searching again.•Setup configuration script filename is set as CONFIG.CI3 and it’snot changeable.8. Set Printer Drivers window appears. Click Next.If necessary, configure printer name, sharing, shared name and defaultprinter setting. If you changed settings then you should click Applybutton to apply changes then click Next.9. Summary window appears. Check the package information and clickNext to start creating the setup package.You can modify the package configuration by clicking the Back button.Check the Install the package as silent mode, if you want tomake the installation package as a silent installation package.Silent installation installs the driver automatically by the set optionwithout user intervention.10. When creating the setup package is finished, Packaging Completedwindow appears.Check Open package folder upon completion if you want the createdpackage to open automatically after it’s created.11. Click Finish.Modifying a setup script file1. Make sure that the machine is connected to the network or USB andpowered on.2. Insert the supplied software CD into your CD-ROM drive.•The software CD should automatically run and an installation windowappears.•If the installation window does not appear, click Start and then Run.Type X:\Setup.exe, replacing “X” with the letter which representsyour CD-ROM drive. Click OK.Downloaded from www.Manualslib.com manuals search engine