Samsung CLX-9250ND Administrator's Manual

Also see for CLX-9250ND: Service manual Installation guide Brochure & specs Service manual

2 SafeCom Go SamsungD60719-07 19Note: All copy jobs are tracked as either color or mono depending on the colormode setting on the device. To ensure copy jobs are tracked correctly, set thecolor mode to Auto on the device.Drivers: When pull printing, the SafeCom solution will compare the driver nameembedded in the print job with its list of driver names. If no match is found thedocument will appear with a question mark [?] in the document list (3.4). Thisway the user is warned that fidelity is low and the document may printincorrectly.Timeout: The user is automatically logged out after the device is idle for aperiod of time. The default is 60 seconds, with a configurable range between10-7200 seconds. If the device requires intervention (IRQ), because it has runout of paper, for example, the timer is paused.Note: Timeout specified here also sets the timeout of the device web page.Post track: Select to enable post tracking. This is only relevant with SafeComTracking. Refer to SafeCom G3 Administrator’s Manual D60603High speed print: Select to allow faster printing. The speed is comparable tothat of printing a document directly to a device. High speed print works best inenvironments where all users only use pull print.