Samsung CLX-9250ND Administrator's Manual

Also see for CLX-9250ND: Service manual Installation guide Brochure & specs Service manual

2 SafeCom Go SamsungD60719-07 252.7.4 Resend configurationIf a device added in the SafeCom Administrator is not configured correctly, or ifthe device must be reconfigured to a different server, it is possible to resendthe configuration details (Server name and Hostname) to the device.1. Browse to Devices in the SafeCom Administrator.2. Right-click the device and click Resend configuration.The configuration details are now sent to the device and the configuration issuccessful when the message "Server is reconfigured" appears.Note: The Resend configuration functionality does not work with devices thatare SafeCom enabled via the device server.2.7.5 Select user identification method1. Open the Configuration web page (2.6.1).2. Change User identification.2. Click Apply.Note: If User code or Card or User code is selected, the maximum number ofdigits allowed is 39. If more than 39 digits are entered, the device still onlyuses the first 39 digits, and if they are correct the user is logged in.2.7.6 Login with Windows without specifying the domainOn MFPs with touch screen it is possible to login by entering your Windowsusername, password (and domain). If all users belong to the same domain youcan avoid prompting users to enter the domain at the device.1. Open the Configuration web page (2.6.1).2. Specify a Default domain.3. Change Pre-fill domain to Hide.4. Click Apply.2.7.7 Login without PIN codeUse PIN codes on devices with a keypad or touch screen. This setting applies tothe device and overrules the equivalent user property. Requesting the user toenter a personal 4-digit PIN code for identification at the device can enhancedocument security.1. Open the Configuration web page (2.6.1).2. Clear Login without PIN code if you want to prompt users for PIN code.3. Click Apply.