Samsung CLX-9250ND Administrator's Manual

Also see for CLX-9250ND: Service manual Installation guide Brochure & specs Service manual

2 SafeCom Go SamsungD60719-07 302.7.15 Change the device home serverGo through the following steps to change the device home server in a multi-server solution.1. Open the Configuration web page (2.6.2) and add a new server to theSafeCom servers list by entering the IP address or hostname in the Addserver field and click Add.Note: The order in which the servers are listed in the SafeCom serverslist determines the priority of the servers. If the device cannot connectto the first device in the list, it will attempt to connect to the next.2. Click Apply.Note: Allow one minute before the new SafeCom Server settings takeeffect. Otherwise you may get a login error at the MFP.Note: On a cluster server the IP address MUST be that of thevirtual server.3. Open the Device properties dialog in SafeCom Administrator and pointto the new Home server.2.7.16 Update SafeCom Go Samsung softwareUpdate SafeCom Go Samsung software by loading the new *.b94 file to thedevice.1. If the previous version is S94 010.010*06 or older you must first uninstallthe old version of SafeCom Go Samsung as described in section 2.7.18.2. Open the SafeCom Administrator.3. Browse to and select the device.4. Right-click the device and click Update software.5. Click Browse to find the *.b94 file and click Send.6. Enter User name and Password and click OK.7. When the update is complete, click Close.Note: If the Samsung device does not function correctly after a softwareupdate then power cycle the device.2.7.17 Is the SafeCom Go Samsung software loaded?To confirm that SafeCom Go Samsung software is loaded and running.1. Open a web browser and enter the IP address of the device in theAddress field.2. Click Network / Security / Maintenance.3. Click Maintenance on the menu.4. Click Application in the menu on the left.5. Verify that State of SafeCom Go is enabled.