Samsung CLX-9250ND Administrator's Manual

Also see for CLX-9250ND: Service manual Installation guide Brochure & specs Service manual

2 SafeCom Go SamsungD60719-07 242.7 SafeCom Go Samsung - How toThe following subsections contain step-by-step instructions for some commonadministrator tasks.2.7.1 Get the SafeCom Go Samsung softwareThe SafeCom Go Samsung software file (*.b94) was installed from the SafeComCD or can be downloaded using the SafeCom Administrator function Check forupdates.Alternatively a software package can be downloaded:1. Download the safecom_go_samsung_xxx.zip file from the link supplied toyou.2. Extract the file into the device_software subfolder.Normally the destination folder is:C:\Program Files\SafeCom\SafeComG3\device_software2.7.2 Specify SafeCom Server1. Open the Configuration web page (2.6.1).2. Enter the SafeCom servers by hostname or IP address.3. Click Apply.4. Repeat step 1 through 3 for additional servers.Note: After you click Apply you should allow one minute before the changedSafeCom Server settings take effect. Otherwise you may get a login error atthe device.2.7.3 Register deviceIf the SafeCom Go Samsung software is not installed via the SafeComAdministrator, you need to register the device.1. Open the Register web page (2.6.1).2. Enter the User logon and PIN code of a user with Technician orAdministrator rights. The user must have a PIN code.3. Click Register.Once the device is registered it will appear in SafeCom Administrator.The device can also be registered with the SafeCom solution by: Using the Add device function in SafeCom Administrator. Login at the device by a user with Technician or Administrator rights.