Samsung DCS Keyset User Guide– 12 –Note: If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER key before dialling.Answering An Outside Call•••• Lift the handset and you are automatically connected to the ring-ing call. (See Ring Preference under Customising Your Keyset.)ORPress the ANS/RLS key to automatically answer on the speaker-phone.Note: If a call is flashing at your keyset but not ringing, you must press the flashingkey to answer.Universal Answer DeviceOutside lines can ring over the paging system or to a loud ringer. Toanswer calls ringing in night service to this device, dial 67 or pressthe UA key.Note: If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER key before dialling.Recall Dial Tone•••• Press the NEW key to disconnect your existing call, wait for dialtone and then make a new call on the same line.Note: If the NEW key does not appear on your keyset, the RECALL key may be pro-grammed to recall dial tone.Sending a FlashWhile on an outside call, press the programmed FLASH key to send aflash to the telephone company. This is required for some customcalling features or CENTREX use (e.g. for nuisance calls).
