Samsung DCS KEYSET User Manual

Also see for DCS-816: Programming manual Programming manual Installation manual Installation manual General description

Contents

Samsung DCS Keyset User Guide– 32 –Voice DiallerVoice Dialler allows you to record a voice pattern in a digital formatand store it in an addressable location. When the Voice Dialler fea-ture is activated, it will identify, retrieve and process the associatedstored data. This latest technology has been applied to the area ofpersonal speed dialling. It allows the calling party to speak a nameinto the handset and have the system place a call.Note: The Voice Dialler feature requires the optional VDIAL card and is not avail-able on 816 or 408/408i systems.To use Voice Dialler:•••• You must be assigned to a channel of the VDIAL card. Your sys-tem administrator should do this.•••• Change your extension’s passcode (see Change Your Passcode inCustomising Your Keyset).•••• Assign personal speed dial numbers (see Programming PersonalSpeed Dial Numbers, above).Recording a Voice Dialler Name1. Lift the handset.2. Press the VREC key, if assigned, or dial 682.3. Enter your extension’s passcode.4. Enter the personal speed dial bin number, e.g. 05.5. After the short tone burst, speak the name carefully into the hand-set.Note: Say the name as one word (e.g., Johnsmith for John Smith). Avoid similarnames such as Ted, Ned and Fred.If you are successful, you will hear a short tone burst confirming thename is recorded. If you hear error tone, record the name again fol-lowing the same procedure.