Samsung DCS Keyset User Guide– 14 –Internal CallsCalling Other Extensions1. Dial the extension number or group number.2. Wait for the party to answer. If you hear a brief tone burst insteadof ringback tone, the extension you called is set for Voice An-nounce or Auto Answer. Begin speaking immediately after thetone.3. Finish the call by replacing the handset or pressing the ANS/RLSkey.Note:• If you have a DSS key assigned to an extension or a extension group, you canpress this key instead of dialling the number.• If the Hot Keypad feature has been turned off, you must first lift the handset orpress the SPEAKER key before you begin dialling.Answering Internal CallsYour keyset can answer internal calls in one of three modes: Ring,Voice Announce and Auto Answer. Ring mode is the normal mode,unless you change it to another mode.Ring Mode1. When your keyset rings, simply lift the handsetORPress the ANS/RLS key to be connected to the calling extension.2. Finish the call by replacing the handset or pressing the ANS/RLSkey.See Ring Preference under Customising Your Keyset.
