Samsung DCS KEYSET User Manual

Also see for DCS-816: Programming manual Programming manual Installation manual Installation manual General description

Contents

Samsung DCS Keyset User Guide– 38 –Note:• You can first view message indications and return them in the order youchoose. See Viewing Message Indications under Display Features.• If the Hot Keypad feature has been turned off, you must first lift the handset orpress the SPEAKER key before you begin dialling.• If a message has been left at your keyset by a keyset in Auto Answer mode,you must manually cancel the message after it has been returned.Programmed MessagesWhen you plan to be away from your phone for any length of time,you can leave a programmed station message on your phone’s display(e.g. In a Meeting). Display keysets calling you will also see thismessage. The message may also contain instructions for callers tofollow. There are 20 possible messages (01–20). Messages 01–10 areset up by default as follows:01. IN A MEETING02. OUT ON A CALL03. OUT TO LUNCH04. LEAVE A MESSAGE05. PAGE ME06. OUT OF TOWN07. IN TOMORROW08. RETURN AFTERNOON09. ON VACATION10. GONE HOMEMessages 11–20 are blank for new messages.Note:All programmed messages (01–20) can be changed by reprogramming the system.Therefore, some or all of the messages shown above may be different on your sys-tem. To find out what your messages are, follow the procedure below. If necessary,ask your system administrator to set up specific messages you might require.