Samsung DMT350 Series User Manual

Also see for DMT350 Series: Installation guide Installation guide Installation requirements Installation guide Service manual

Contents

using your dishwasher _15adjuSTIng ThE hEIghT of ThE uppEr rackYou can adjust the height of the upper rack in your Samsung dishwasher so that the lower rack canaccommodate larger sized dishes. Depending on where you set the upper rack height, the lower rack canaccommodate plates up to 14 in. (36cm) in diameter and the upper rack can accommodated plates up to12 in. (30cm) in diameter.dmT350 SeriesTo adjust the height of the upper rack, follow these steps:1. Remove the upper rack following the directions in Removing theUpper Rack below.2. If you want to lower the upper rack, re-install the rack as shown inFigure A to the right.3. If you want to raise the upper rack, re-install the rack as shown inFigure B to the right.We recommend adjusting the height of the upper rack beforeloading dishes into the rack. If you adjust the the rack after loadingthe dishes, you may damage the dishes.rEmovIng ThE uppEr rackPull the upper rack towards the front and then remove it by lifting it up slightly and pulling it towards thefront. See the illustrations below.While the upper rack is removable, it must be installed for the dishwasher to operate properly.If you attempt to operate the dishwasher without the rack, noise will occur and the dishwasher willperform poorly.Step 1. Step 2. Step 3.02 using your dishwasherCAUTIONCAUTIONDMT350_DD68-00080A.indb 15 2010-08-30 �� 3:34:33