Samsung DMT350 Series User Manual

Also see for DMT350 Series: Installation guide Installation guide Installation requirements Installation guide Service manual

Contents

8_ setting up your dishwashersetting up your dishwasherconTrol panEldmT350 SeriesdISplAyDisplays wash information (Delay start hours, Low rinse, Blinking LED duringthe wash), and error messages.When Low Rinse remains illuminated, there is no rinse agent in thedispenser. Refill the rinse aid dispenser.If an error occurs during an operation, an error message is displayed with awarning sound. Refer to the Information codes page. (see page 25)ChIld lOCK/UNlOCKThis option allows you to lock the buttons on the control panel so childrencannot accidently start the dishwasher by pressing the buttons on thepanel.To activate and deactivate Child lock/unlock, hold the Child lock/unlock button down for 3 seconds.- When Power is On : Hold down the Child lock/unlock button for three(3) seconds.- When Power is Off : Push the Power button first, and then hold downthe Child lock/unlock button for three (3) seconds.delAy START Delay a cycle for up to 24 hours in one-hour increments. The hour displayedindicates the time at which the wash will be started.SANITIZeThe temperature rises to 162 ˚F (72 ˚C) in the final rinse cycle for hightemperature sanitization.If you select the Sanitize option, the “Sanitize” lamp blinks when the watertemperature reaches the sanitary temperature (over 155 ˚F (68 ˚C)), and thenremains illuminated until the Sanitze option ends. When you open the dooror press Power button, the “Sanitize” lamp turns off.You cannot select the delicate cycle if you select the Sanitize option.1 2 3 4 51234DMT350_DD68-00080A.indb 8 2010-08-30 �� 3:34:31