Samsung DMT350 Series User Manual

Also see for DMT350 Series: Installation guide Installation guide Installation requirements Installation guide Service manual

Contents

24_ troubleshootingtroubleshootingpROblem pOSSIble CAUSe SOlUTIONleaves glasses witha dim polish.The water supplied is soft and toomuch detergent was used.Underload the dishwasher and use a rinseaid to minimize this.Aluminum dishes were included inthe wash load.Remove the marks on the dishes using alow sensitivity cleaner.leaves a yellowor brown film onthe inside of thedishwasher.This is caused by coffee and teasoils.Remove the soils using a spot cleaner.does not dry disheswell.There is no rinse aid in thedispenser.Check the dispenser and add the rinse aid.Use a liquid type rinse aid.The temperature of the wateris low when the dishwasher isrunning.Connect the water supply line to a hotwater supply.Use rinse aid with the Sanitize option.Too many dishes have beenloaded.Proper loading of items can affect drying.Load your dishes as recommended. (Seepage 16.)Glasses and cups with concavebottoms hold water. This watermay spill onto other items whenunloading.After finishing the cycle, empty the lowerrack first and then the upper rack, this willavoid water dripping from the upper rackonto the dishes in the lower rack.has a bad odor.There is water left over when thelast cycle is not completed.Insert detergent without loading dishes,and run the Normal cycle to clean thedishwasher.Drain Hose is obstructed. Contact a qualified service technician toremove any obstruction from the drainhose.The dishwasher is not used dailyor Soiled dishes left in unit toolong.With the dishwasher empty and nodetergent, place a glass with 8ounces of vinegar upright into the lowerrack, and then run a Normalcycle.Is too noisy.Sound is generated when thedispenser cover is open and thedrain pump is operating in an earlystage.This is normal operation.The dishwasher is not level. Ensure the dishwasher is level.Foreign material (Screw, Plasticpiece) is in pump chamber.Contact a qualified service technician toremove foreign material from the pumpchamber.There is a ‘chopping’ soundbecause a nozzle is bumpingagainst the dishes.Rearrange the dishes.DMT350_DD68-00080A.indb 24 2010-08-30 �� 3:34:42