Samsung DW7933LRASR/AA Installation Manual

Also see for DMT350 Series: Installation guide User manual Installation requirements Installation guide Service manual

Contents

14_ installing the dishwasherSTEP 7 PLACING THE DISHWASHER AND CONNECTING THE HOTWATER SUPPLY LINE1. Adjust the three leveling legs at the bottom of the dishwasher after measuring the heightof the cabinet opening from under the countertop to the fl oor. (See Step 7, Leveling theDishwasher.)2. Locate the hot water supply line and the power cable.3. Place the dishwasher so that the hot water supply line is in the left channel and the powercable is in the right channel of the base of the dishwasher. Use standard duct tape or cableties to secure the water line and electrical cable to their adjacent channels in the base. Thiscan prevent the the water line and electrical cable from being squeezed when you push thethe dishwasher into place.4. Pull the drain hose through the hole in the sink cabinet side wall. Keep it free of kinks.5. Make sure the hot water supply line is not twisted, and then connect the hot water supplyline to the elbow joint.6. Slide the dishwasher carefully into the installation space. If possible, gently pull any excesslengths of water supply line, drain hose, or power cable back as you move the dishwasher.Get a second or third person to help you do this if necessary.Do not place the dishwasher on the water supply line, drain hose, or power cable.Also, make sure they are not folded or twisted.

installing the dishwasherCAUTIONDo not overtighten the 90˚ elbow.Doing so may damage the waterinlet valve and cause a water leakPower cablePower cableHot Water Supply LineHot Water Supply LineDrain hoseDrain hose Hot Water Supply LineHot Water Supply LineElbow( ³/8” (9.5mm))Elbow( ³/8” (9.5mm))Inlet valveInlet valveCAUTIONinstallation_DD68-00046A-05_EN.indd Sec3:14installation_DD68-00046A-05_EN.indd Sec3:14 2011-12-28 4:27:242011-12-28 4:27:24