Samsung DW7933LRASR/AA Installation Manual

Also see for DMT350 Series: Installation guide User manual Installation requirements Installation guide Service manual

Contents

2_ safety instructionssafety instructionsThroughout this manual, you’ll see Warning and Caution notes. These warnings,cautions, and the important safety instructions that follow do not cover allpossible conditions and situations that may occur. It’s your responsibility to usecommon sense, caution, and care when installing, maintaining, and operating thedishwasher. Samsung is not liable for damages resulting from improper use.IMPORTANT SAFETY INSTRUCTIONSWhat the icons and signs in this installation guide mean:WARNINGHazards or unsafe practices that may result in severe personal injury ordeath.CAUTIONHazards or unsafe practices that may result in personal injury or propertydamage.CAUTIONTo reduce the risk of fi re, explosion, electric shock, or personal injury whenusing the dishwasher, follow these basic safety precautions:Follow directions explicitly.Make sure the machine is grounded to prevent electric shock.Call the service center for help.These warning signs are here to prevent injury to you and others.Please follow them explicitly.After reading this section, keep it in a safe place for future reference.Read all instructions before using the appliance.Install and store the dishwasher inside, away from exposure to weather.Do not install the dishwasher near electrical components. Keep the dishwasher away fromopen flames.Do NOT install the dishwasher on a carpet as this is a fire hazard.Do NOT install the dishwasher in a location where the water may freeze (where thetemperature falls below 32 ˚F (0 ˚C)). Frozen water in the hoses or pipes may damage thedishwasher.As with all any equipment using electricity, water and moving parts, potential hazards exist.To safely operate this appliance, become familiar with its operation and exercise care whenusing it.The dishwasher must be properly grounded. Never connect it to an ungrounded outlet.Prior to removal of original dishwasher and the installation of your new unit, make sure toswitch off your circuit breaker. Do not connect the dishwasher until you have completed theinstallation. Connecting the power cable is the last step when installing the dishwasher.All wiring and grounding must be done in accordance with the electrical code applicable tothe region.CAUTIONinstallation_DD68-00046A-05_EN.indd Sec1:2installation_DD68-00046A-05_EN.indd Sec1:2 2011-12-28 4:27:222011-12-28 4:27:22