Samsung DW7933LRASR/AA Installation Manual

Also see for DMT350 Series: Installation guide User manual Installation requirements Installation guide Service manual

Contents

preparing the dishwasher enclosure _501 PREPARING THE DISHWASHERpreparing the dishwasherenclosurePRODUCT DIMENSIONSENCLOSURE DIMENSIONSThis dishwasher is designed to be enclosedon the top and on both sides by a standardresidential kitchen cabinet unit.The installation enclosure must be clean and freeof any obstructions.The enclosure must be at least 24 inches wide,24 inches deep, and 34 1 /8 inches high.For the front door of the dishwasher to be fl ushwith the leading edge of the counter top, thecounter top must be at least 25 inches deep.Side view(DMT800 series/DMT610 series/DMT400 series)Side view(DMT350 series /DW7933 series)Rear view27” (686 mm)20 ½” (520 mm)24 ²⁄ 3 ” (627mm)23 7 ⁄ 8 ” (605 mm)33 7 ⁄ 8 ” (860mm)20 ½” (520 mm)24 ²⁄3” (627mm)5” (128mm)2 1⁄ 3 ” (60mm)The water supplyline, power cableand drain hoseshould go throughthis space behindthe dishwasher.Then, they run inchannels underthe dishwasher toconnections in thefront.24” (610 mm)minimum24” (610 mm)minimum34 1 ⁄8 ” (867 mm)minimuminstallation_DD68-00046A-05_EN.indd Sec5:5installation_DD68-00046A-05_EN.indd Sec5:5 2011-12-28 4:27:222011-12-28 4:27:22