Changing Your Settings 177Advanced Wi-Fi SettingsThe advanced Wi-Fi settings allow you to set up and managewireless access points.1. From the Home screen, tap (Apps) ➔ Settings ➔(Connections tab) ➔ Wi-Fi.2. Press (Menu) ➔ Advanced.The following options are available:• Network notification: alerts you when a new WAP is available.• Passpoint: allows you to connect to passpoint-enabled Wi-FiAccess Points automatically. Touch and slide the slider to theright to turn it on.• Keep Wi-Fi on during sleep: allows you to specify when todisconnect from Wi-Fi.• Auto network switch: allows you to be automaticallyconnected to an Wi-Fi Hotspot as soon as your phone detectsit.• MAC address: view your device’s MAC address, requiredwhen connecting to some secured networks (not configurable).• IP address: view your device’s IP address.WPS Push ButtonThe WPS (Wi-Fi Protected Setup) feature (sometimesassociated with a physical or on-screen button on mostWAPs) allows you to pair your device and WAP without theneed for entering a passcode. This process is similar to Wi-FiDirect pairing.In this case, once the WPS feature is active on your WAP,your device can then detect it and then immediately pair to it.Note: WPS-capable routers appear in the Wi-Fi list of availabledevices with the term (WPS available) below their name.To pair your device using WPS:1. Follow the WPS activation instructions specific to yourWireless Access Point.2. From the Home screen, tap (Apps) ➔ Settings ➔(Connections tab) ➔ Wi-Fi.3. Press (Menu) then tap WPS push button.4. Once the connection is complete, confirm the externalrouter now appears in the Wi-Fi list as connected.
