ŝ241ŞError MessagesMemory card fullThe Memory Card is full and no more imagescan be saved. Insert a new Memory Card or delete unwantedimages. (p.38, 98)You may be able to save new images by changing the qualitylevel or recorded pixels. (p.122, 123)There are no images for playback on the Memory Card.You are trying to play back an image in a format notsupported by this camera. You may be able to play it back onanother brand of camera or your computer.The Memory Card is not inserted in the camera. (p.38)The Memory Card has a problem, and image capture andplayback are impossible. It may be viewable on a PC but notthe camera.The Memory Card you have inserted is unformatted or hasbeen formatted on a computer or other device and is notcompatible with this camera. Use after formatting with thecamera.A locked Memory Card is inserted in the camera. Unlock theMemory Card. (p.39)The selected rotated image is protected.Remove protection from the image.The inserted card cannot be used on a camera.Insert a usable card.The batteries are exhausted. Install new batteries in thecamera. (p.36)No imageCamera cannot display this imageNo card in cameraMemory card errorCard not formattedCard lockedCard is lockedRotation information cannot be savedThis image is protectedRotation information cannot be savedCannot use this cardBattery depletedNot enough battery remainingto clean sensorAppears during CCD cleaning if battery set level is insufficient.Replace the battery set with a new one or use an AC adaptor.(p.37)Error Message Description