ŝ46ŞAttaching the Lensƈ Only D-XENON, D-XENOGON lenses can be used with this camera.Some functions are restricted when lenses are not set to Aperture A (Auto). Also see “Notes on[Using Aperture Ring]”. Other lenses and accessories will not be available with factory defaultsettings. To allow shutter release, set [Use Aperture Ring] in [CUSTOM2 MENU] menu.1. Check that the camera is off.2. Remove the body mount cover (ڹ) and lens mount cover (ں).Be sure to put the lens down with the lens mount side facingupward to avoid damage.3. Align the red dots on the camera and the lens, and secure byturning the lens clockwise until it clicks.After attaching, check that the lens is secure. Also check thatthe red dots of the lens are on top and the attached portiondoes not move sideways.ƃ Turn the camera off before attaching or removing the lens to prevent unexpected lens problems.INFORMATION
