ŝ57ŞOPS (Optical Picture Stabilisation)Setting the OPS Functionƈ The [ OPS] setting menu appears when the camera is turned on with the Shake Reductionswitch on and a type of lens that does not support automatic acquisition of lens information such asfocal length is mounted. Use the [ OPS] setting menu to set the Focal Length.ƃ The [ OPS] setting menu may appear but is not selected when using a lens that supportsautomatic acquisition of lens information such as focal length because the Focal Length is setautomatically.ƃ When using a lens without the A (Auto) position on the aperture or with the aperture set to aposition other than the s position, set [Use Aperture Ring] on the [CUSTOM2 MENU] menu to[On].INFORMATION1. Use the four-way controller (ȜȞ) to set the Focal Length.Select from the following focal length values.(The default setting is 35.)8 10 12 15 18 20 24 28 30 3540 43 50 55 65 70 77 85 100 120135 150 180 200 250 300 350 400 450 500550 600 700 800 - - - - - -FocalLengthƈ To change the Focal Length and OPS settings, use [ OPS]on the [CAPTURE MENU] menu.CAPTURE MENU: Set : BackOptical Picture StabilizationFocal LengthCAPTURE MENU: Move : ExitUser RegistrationColor SpaceExtended BracketMulti ExposureMemory of SettingsOPSOffOffManual