ŝ68ŞOther Shooting Modesƈ Use the Mirror Lock Up function if camera shake is evident even when Cable Switch (optional) orRemote Control Unit (optional) is used.When the shutter release button is pressed, the mirror pops up and the shutter is fired 2 seconds laterif the 2 second Self-Timer setting is selected. Avoid camera shake when mirror pops up by using thismethod. Follow the procedure below to take a picture with the mirror lock up.1. Mount the camera to a tripod.2. Use the Fn button and the four-way controller (Ɗ) to select (2 sec. Self-Timer). (p.62)3. Focus on the subject.4. Press the shutter release button fully.The mirror pops up and the picture is taken 2 seconds later. AE lock is enabled with the exposurevalue set immediately before the mirror goes up.Using Mirror Lock Up Function to Prevent Camera Shake