ŝ75ŞUsing the Built-in Flashƈ You can change the flash output in a range of -2.0 to +1.0. The Flash Compensation values are asfollows for 1/2 EV and 1/3 EV.ſ Set interval of steps in [EV Steps] in the [CUSTOM1 MENU] menu. (p.133)ƃ Set in Flash item of Fn menu by using the Rear e-dial.Step interval Flash Compensation1/2 EV -2.0, -1.5, -1.0, -0.5, 0.0, +0.5, +1.01/3 EV -2.0, -1.7, -1.3, -1.0, -0.7, -0.3, 0.0, +0.3, +0.7, +1.0ƃ blinks in the viewfinder when the flash pops up during Flash Compensation. (p.27)ƃ If the maximum flash output is exceeded when corrected to the plus (+) side, no compensationwill be effective.ƃ Compensating to the minus (-) side may not effect the image if the subject is too close, aperture islow or sensitivity is high.INFORMATIONCompensating Flash OutputFLASHFill-In: Set