106Using P-TTL Auto ModeUse this flash mode with the SEF-36PZF or SEF-54PZF flash unit. Whenflash mode is set to [P-TTL auto], the flash pre-fires right before taking picturesusing 16-segment metering and allows more precise control. P-TTL auto modeis available with SEF-54PZF and SEF-36PZF models while using a wirelessconnection.1. Remove the cover of the hot shoe and attach the external flash(SEF-36PZF or SEF-54PZF).2. Turn on the external flash.3. Using the external flash, P-TTL mode is automatically set to use.4. Confirm that the external flash is fully charged and then take the picture.● P-TTL auto is only available with the SEF-36PZF or SEF-54PZF flashunit.● The will light in the viewfinder when the flash is ready (fully charged).● For details such as operation method and effective distance, please readthe external flash manual.● The flash does not discharge when the subject is bright enough whenFlash Mode is [Auto ( )] or [Auto+Red-eye ( )]. Therefore, it may notsuitable for daylight-sync shooting.● Never press the flash pop up button( ) when any external flash unit isattached to the camera. The built-in flash will hit the external flash.● See the SEF-36PZF or SEF-54PZF operating manual for details.Using High-Speed Flash Sync ModeWith the SEF-36PZF or SEF-54PZF, you can discharge the flash to take apicture at a shutter speed faster than 1/180 second. More than two externalflashes are required for a wireless connection.■ Attaching and Using the SEF-36PZF or SEF-54PZF on the Camera1. Remove the hot shoe cover and attach the external flash (SEF-36PZF orSEF-54PZF).2. Rotate the Mode dial ( ) to select Tv or M.3. Turn on the Camera and external flash.4. Set the external flash sync mode to HS (high-speed flash sync.).5. Confirm that the external flash is fully charged and then take the picture.● The will light in the viewfinder when the flash is ready (fully charged).● High-speed flash sync is only available when the shutter speed is fasterthan 1/180sec.● High-speed flash sync is not available when the exposure mode is set toB (Bulb).● See the SEF-36PZF or SEF-54PZF operating manual for details.Using an External Flash (Sold Separately)
