096Adjusting the sensitivity of the image sensorSetting the SensitivityYou can set the sensitivity to suit the brightness of the surroundings.The sensitivity can be set to [AUTO 100-400] or within a sensitivity rangeequivalent to ISO [100] to [6400].1. Press the Fn button.- The Fn menu appears.2. Press the direction button (►) on yourcamera.- The ISO sensitivity menu appears.3. Press the direction buttons (◄►) to select adesired sensitivity.● Captured images can show more noise if higher Sensitivity is set.● Set this menu in [CUSTOM1 MENU] > [ISO Steps].● If [Set Max ISO Range] is set to [6400] in the [CUSTOM1 MENU], ISOsensitivity can be set to 6400.● It is possible to see more noise in the images when setting the ISOsensitivity to “6400.”Setting the Range of Automatic Correction in AUTOSet range to automatically correct sensitivitywhen Sensitivity is set to [AUTO].The sensitivity is automatically corrected inthe range of [AUTO 100-400] by default.You can set the changeable ISO range forautomatic correction using the Fn menu.Front dial Sets the lower sensitivity limit.Rear dial Sets the upper sensitivity limit.When the camera is set to the following conditions, the sensitivity cannot beset to auto.- The exposure mode is set to Sv (Sensitivity Priority), M (Manual), B (Bulb)or X (flash synchro) mode.: Set: MoveAUTO 100 - 400ISO SENSITIVITY: Exit: Move: Set: MoveAUTO 100 - 400ISO SENSITIVITY: Set: Move100ISO SENSITIVITY
