052Remote Control Shooting (Sold Separately)You can set the remote control function in the drive mode menu.(sold separately)• [Remote Control] : The shutter will be released immediately the shutter releasebutton on the remote control unit is pressed.• [Remote Control (3s delay)] : The shutter will be released 3 secondsafter the shutter release button on theremote control unit is pressed.• [Remote Control (continuous)] : The continuous shooting starts as soon asyou press the remote control unit.Press the remote control unit one moretime to finish shooting.1. Press the Fn button on your camera andthen press the direction button (▲).- The drive mode screen appears.2. Press the direction buttons (◄►) to select, or .- The self-timer lamp will blink to let you knowthat the camera is in remote control waitstatus.3. Press the OK button.- The camera is ready to take pictures.4. Press the shutter release button halfway.- The autofocus system operates. The focus indicator ( ) appears in theviewfinder when the subject is in focus.5. Point the remote control unit towards thefront of the camera and press the shutterrelease button on the remote control.The picture is taken.● You cannot focus with the remote control unit in default settings. Focuson the subject first before operating with the remote control. You canset [AF in Remote Control] to [On] in the [CUSTOM1 MENU] menu.● Turn the power off to stop the remote control operation after it hasbeen activated.● The remote control may not operate in backlit conditions.● To take a picture while charging the built-in flash, set [Release inCharging] to [On] in the [CUSTOM2 MENU].● When using the built-in flash, raise the flash into position first.Remote ControlDrive: Set: MoveSingle Frame ShootingDrive: Set: Move
