Settings ļ ChannelDouble tuner configurationIn this configuration, both tuners have to be connected to antenna signal independently by two separatecoaxial cables. This configuration allows both tuners tuning to two satellite transponders at the same time.With double tuner configuration, the user can take advantage of PIP or Double-REC with no restrictions.Please refer to the following table for the detail functionalities.InstallationType Tuner settings Availalble/Restricted Services ExpectedResult1.LNB1.1 Double[Tuner1 (ANT 1 IN),Tuner2 (ANT 2 IN)]- 2 REC : same TS- 2 REC : different TS- PIP : same TS- PIP : different TS- Zapping among different TS with 1 RECOOOOO1.2 Loop[Tuner1 (ANT 1 IN)]1.2.1 Merged satellite signal -- Tuner11) Under same Position(Horizontal/Vertical) and same Tone(On/Off)- 2 REC : same TS- 2 REC : different TS- PIP : same TS- PIP : different TS- Zapping among different TS with 1 RECOOOOO2) Under different Position(Horizontal/Vertical) and differentTone(On/Off)- 2 REC : same TS- 2 REC : different TS- PIP : same TS- PIP : different TS- Zapping among different TS with 1 REC-X-XX1.2.2 Single(Not merged) satellite signal -- Tuner1 (only signal fromMPEG player)- 2 REC in same TS- 2 REC among different TS- PIP among same TS- PIP among different TS- Zapping among different TS with 1 RECOXOXX1.3 Loop[Tuner2 (ANT 2 IN)]Not Supported (No AV): It will be mentioned in 1st install help description and User manualto avoid user confusion.36