Samsung GX-SM660SM User Manual

Settings  SystemNetwork settingsBefore you begin, contact your ISP (Internet Service Provider) to find out if your IP address is static. If itis dynamic and you have a wired network, we recommend using the Automatic configuration proceduresdescribed below.Connect the STB to your router using a LAN cable before you start the configuration procedure.To begin configuring your network connection, follow these steps:Automatic1. Press the MENU button on the remote control.2. Select [Settings] > [System], and then press the ▶ button.3. Select [Network settings], and then press the ▶ button.4. Select [Auto] in the Network Settings screen.5. Select [OK], and then press the " button. The STB detects the wired connection, verifies the networkconnection and then connects to the network.ManualIf you have a static IP address or the Automatic procedure does not work, you'll need to set the NetworkSettings parameters manually.1. Select [Manual] in the Network Settings screen.2. Enter IP address, Mask, Gateway and DNSs manually.\ You can get the Network parameters from your Internet provider.3. Select [OK] to save settings, and then press the " button.50