Settings SystemENGSYSTEMYou can check product information or reset the STB todefault settings.Product informationThis menu displays the product information: [Brand ID],[Product ID], [Firmware version], [Software version],[Micom version], [Serial number] and [Last softwareupdate].Auto Turn offThis lets you set the STB go into the standby mode automatically from live mode if your STB is not being usedfor the set up time.When [Auto Turn off] is set to one of the available timeout values and the STB is idle for a certain period oftime, the product saves energy by turning off the STB automatically.\ If the STB has been turned off or left unplugged for more than 1 week, the device may loseauthorization for satellite TV services. To restore satellite TV services, please contact your satelliteTV service provider.Timeout to power saving modeThis lets you set the STB go into the deep standby mode automatically from the standby mode. The Powersaving mode means the most low power mode. STB is required to reboot when user press power button offront panel or remote controller.When [Timeout to power saving mode] is set to one of the available timeout values and the STB gets turned offfor a certain period of time on the standby mode status, the product saves energy the most by powering off theSTB automatically.49