20INTERCOM CALLSCALLING OTHER STATIONS• Dial the extension number or group number.• Wait for the party to answer. If you hear a brief tone burst instead of ringbacktone, the station you called is set for Voice Announce or Auto Answer. Beginspeaking immediately after the tone.• Finish the call by replacing the handset or pressing the END button.NOTES:1. If you have a DSS button assigned to an extension or station group, you maypress this button instead of dialing the number.2. If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER button before you begin dialing.DIALING THE MOST RECENT OUTGOING /INCOMING NUMBER• Press the SEND button.The most recent call (Internal or External to system) toor from the station will be displayed.• Continue to press the SEND button and the system will automatically dial thenumber for you.ANSWERING INTERCOM CALLS• When your keyset rings, simply lift the handset—OR—press the SEND buttonto be connected to the calling station.• Finished the call by replacing the handset or pressing the END button.See Ringing Preference under Customizing Your Keyset.VOICE ANNOUNCE MODEWhen another station calls you, your keyset will sound a brief attention tone andyou will hear the caller’s announcement.• Press the SEND button to turn on the microphone and speak handsfree—OR—lift the handset to reply.• To finish the call, replace the handset or press the END button.NOTE: In order for C.O. calls to be answered handsfree, AUTO ANS CO must be setto ON.
