Using Conference Groups• From the idle condition press the CONFERENCE button.• Select the Conference Group by pressing the corresponding soft key on theleft.• Press SEND to call all members of the group – OR – press the ENTER key todeselect one or more members, then press SEND. As each member answers,their status indicator on the left will change from an X to a circle.• Once you press the SEND button to initiate the conference call you can hangup any member by selecting the member by pressing the MENU button andselecting “SENDING CANCEL”. This action will drop the selected member.• When the conference call is finished, place the handset in the cradle or pressthe SPEAKER key to hang up.Note: The originating station is the Supervisor of the conference. When thisstation hangs up, all the conference group members are disconnected. Whenyou want to hang up but keep the other members in the conference, press theMENU button, the select SUPERVISOR, then cursor to another internal sta-tion, then press ENTER and hang up. Control of the conference is passed tothis station. You are free to go about your business.FORWARDING CALLSThis option allows for one button Call Forward setting.You may forward your callsto another station, station group or external destination.Call forwarding may be set in several different manners:1. From the dial pad, dial 60 plus the extender (see below) that corresponds withthe type of forwarding desired, followed by the station number to forward to.60 + 0 Call Forward Cancel. Cancels all call forwarding from the station.60 + 1 Call Forward All Calls. Forwards all calls under any condition.60 + 2 Call Forward Busy. Forward calls to another station when you are onthe phone.60 + 3 Call Forward No Answer. Forward calls to another station when youdon’t answer.60 + 4 Call Forward Busy/No Answer. Sets both Forward Busy and ForwardNo Answer.60 + 5 Call Forward DND. Forwards calls when you activate DND.60 + 6 Call Forward Follow Me. Forward calls to the station where you cur-rently are.28