26TRANSFER TO VOICE MAILThis feature is used to send a call directly to a voice mailbox.Your keyset must havea correctly programmed VT button to accomplish this. To transfer a call directly toa voice mailbox:• While on a call, press the VT button and dial the mailbox number.• Hang up when dialing is completed.CALL WAITINGIf an outside call has been camped-on to your phone or another station hascamped-on to you:• You will hear a tone in the earpiece and the call that is waiting for you(camped-on) will flash. In addition the bottom line of the display will indicatethe number of the station or trunk party camped-on.• Press the flashing button to answer; your other call will go on hold automati-cally if your station has the Automatic Hold feature set. If not, you must pressHOLD and then the flashing button—OR—finish the first call and hang up;the waiting call will ring.• Lift the handset or press the SEND button to answer.NOTE: Intercom calls will not go on Automatic Hold.When using the speakerphonethe camp-on tone will come through the speaker.CONFERENCE CALLSYou may conference up to five parties (you and four others) in any combination ofoutside lines and internal stations in any order.• While engaged in a conversation, press the CONFERENCE button and receiveconference tone.• Make another call, either intercom or outside, press the CONFERENCE buttonand receive conference tone.• Make another call or press the CONFERENCE button to join all parties.• Repeat the last step until all parties are added.NOTE: When attempting to add another party to the conference and you are notable to reach the desired person, hang up. Simply press the CONFERENCE buttonagain to return to your previous conversation.To drop a party from your conference call:• Press CONFERENCE and dial the extension or line number that is to bedropped.• Press CONFERENCE again to reestablish the conference.