English - 2Connecting headphones (Sold separately)You can connect a set of headphones to your set if you wish towatch a TV programme without disturbing the other people in theroom.When you insert the head set jack into the corresponding port, youcan operate only "Auto Volume" and "Sound Select"(in PIP mode) inSound menu.Prolonged use of headphones at a high volume may damage yourhearing.You will not receive sound from the speakers when you connect headphones to the system.The headphone volume and TV volume are adjusted differently.➣➣➣➣TV Speaker: Off/OnIf you want to hear the sound through separate speakers, cancel the internal amplifier.The +, - and MUTE buttons do not operate when the "TV Speaker" is set to Off.When “TV Speaker” is set to “Off”, you can operate only “Sound Select” (in PIP mode) in Soundmenu.Sound Select: Main/SubWhen the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.− Main: Used to listen to the sound of the main picture.− Sub: Used to listen to the sound of the sub picture.Manufactured under license from Dolby Laboratories. Dolby and thedouble-D symbol are trademarks of Dolby Laboratories.♦➣➣♦Selecting the Sound ModeYou can set the sound mode in the "Tools" menu.When you set to "Dual I-II", the current sound mode is displayedon the screen.1. Press the TOOLS button on the remote control.2. Press the ▲ or ▼ button to select “Dual I-II".. Press the ◄ or ► button to select required option.. Press the ENTER button.Audio Type Dual 1/2 DefaultA2StereoMono MONO AutomaticchangeStereo STEREO ↔ MONODual DUAL 1 ↔ DUAL 2 DUAL 1NICAMStereoMono MONO AutomaticchangeStereo MONO ↔ STEREODual MONO ↔ DUAL 1DUAL 2 DUAL 1If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.This function is only activated in stereo sound signal. It is deactivated in mono sound signal.This function is only available in Analogue TV mode.➣➣➣ToolsAnynet+ (hDMI-CEC)Picture Mode : StandardSound Mode : CustomSleep Timer : OffSRS TS XT : OffEnergy Saving : OffDual l-ll ◄ Mono ►Move Adjust ExitTV Side Panel